Updated November 2026
Smoked pork chops in a smoker come out tender and juicy when you pick thick cuts, keep the smoker around 225°F to 250°F, and pull the chops at an internal temperature of 145°F. This guide covers chop selection, prep, smoking and resting so you get a smoky crust without drying the meat out.
Choose the Right Pork Chops
Thickness matters more than anything else on this list. Chops under 1 inch tend to dry out before they pick up much smoke, while bone-in chops 1.5 to 2 inches thick have enough mass to stay moist over a longer cook. Bone-in loin chops are the most forgiving choice, though boneless center-cut chops work well if you watch the clock closely.
Shopping for one? See our guide: 4 Best Smoked Turkey Legs for Smoking Turkey Legs in a Smoker (2026).
Look for chops with a good fat cap and a little marbling. Lean chops are fine, but they leave less room for error. If you want a full walkthrough on loin cuts, see Pork Loin Chops Smoker: A Step-by-Step Guide to Juicy Results.
Prep and Season the Chops
Pat the chops dry and apply a thin layer of yellow mustard or olive oil as a binder. Then season generously with a rub. A basic mix of brown sugar, paprika, garlic powder, onion powder, black pepper and salt works well, and a store-bought option is fine too. For ideas, 8 Best Rubs for BBQ Pork Chops of 2026: Picks Compared breaks down several popular blends.
For extra juiciness, brine the chops for 1 to 2 hours in a solution of about 1/4 cup kosher salt and 1/4 cup sugar per quart of water. Rinse and dry them well before seasoning. Let the seasoned chops sit uncovered in the fridge for 30 to 60 minutes so the surface dries and forms a better bark.
Smoke Pork Chops at the Right Temperature
Set Up the Smoker
- Preheat your smoker to 225°F to 250°F with a clean, steady stream of smoke.
- Use a mild wood such as apple, cherry or pecan. Hickory works too, but use it sparingly, as pork chops cook quickly and can pick up harsh flavor.
- Place the chops directly on the grate, leaving a little space between each one for airflow.
Cook to Temperature, Not Time
Bone-in chops usually take 1 to 1.5 hours at 225°F to 250°F, depending on thickness. Use a reliable probe thermometer and pull the chops when the center reads 145°F. The USDA recommends 145°F for whole cuts of pork with a 3-minute rest, so you do not need to cook pork to the falling-apart stage that suits shoulder.
If you want a light sear, finish the chops over high direct heat for 1 to 2 minutes per side after they come off the smoker. Keep an eye on them, since the sugar in the rub can burn quickly.
Rest and Serve
Let the chops rest for 5 to 10 minutes, tented loosely with foil if you like. This lets the juices redistribute, so the first cut does not run everywhere. Slice away from the bone if the chop is bone-in, and serve while warm.
Checklist for Smoked Pork Chops
- Chops 1.5 to 2 inches thick, bone-in if possible
- Binder (mustard or oil) and your favorite rub
- Brine ingredients, if brining
- Smoker preheated to 225°F to 250°F
- Mild wood chunks or pellets
- Reliable probe thermometer
- Foil for resting
Common Mistakes to Avoid
- Using thin chops. Anything under 1 inch will dry out quickly.
- Cooking by time alone. Thickness and smoker temperature vary, so trust the probe.
- Overdoing the smoke. Pork picks up smoke fast, so heavy hickory or mesquite can turn bitter.
- Skipping the rest. Cutting in right away lets juices escape.
- Running the smoker too hot. Temperatures above 275°F can dry out lean chops before they develop bark.
Recommended Gear
- Leave-in probe thermometer: Lets you monitor internal temperature without opening the smoker. View on Amazon
- Instant-read thermometer: Useful for checking chops quickly near the end of the cook. View on Amazon
- Mild smoking wood: Apple and cherry chunks suit pork well and keep the smoke flavor balanced. View on Amazon
FAQ
What internal temperature should smoked pork chops reach?
Pull pork chops when the center reads 145°F, then rest them for at least 3 minutes. Many cooks let them rest a bit longer for juicier slices.
How long does it take to smoke pork chops?
Bone-in chops usually take 1 to 1.5 hours at 225°F to 250°F. Thinner boneless chops can finish in under an hour, so start checking temperature early.
Do I need to brine pork chops before smoking?
Brining is optional but helpful, especially for lean boneless chops. A 1 to 2 hour brine helps the meat hold moisture during a long, low smoke.
Conclusion
Smoked pork chops in a smoker reward patience and good prep. Choose thick chops, keep the smoker steady around 225°F to 250°F, and pull them at 145°F. Rest them briefly, and you will get tender, smoky chops every time.

