Updated November 2026

Most briskets take roughly 1 to 1.5 hours per pound when smoked at 225°F to 250°F, but the real finish line is internal temperature and tenderness, not the clock. This guide gives you working time estimates for how long to smoke a brisket in a smoker, plus the signs that tell you it is actually done. Expect a whole packer brisket in the 12 to 16 pound range to take somewhere around 14 to 20 hours.

Estimate Your Total Cook Time

Start with the weight of the trimmed brisket, then multiply by a range rather than a single number. At 225°F, a 12-pound packer often lands between 12 and 16 hours. At 250°F, the same brisket usually finishes closer to 10 to 13 hours. Wrapping, weather and how cold the meat was when it went on all shift the timing, so plan for a window of several hours.

Shopping for one? See our guide: 5 Best Smoke Brisket Butcher Paper Rolls for Pitmasters (2026).

Trimmed weight Smoker at 225°F Smoker at 250°F
8 to 10 lb 9 to 12 hours 7 to 9 hours
11 to 13 lb 12 to 16 hours 10 to 13 hours
14 to 16 lb 15 to 20 hours 12 to 16 hours

For more detail on timing by weight, see How Long to Smoke a Brisket? Times by Weight and Temperature.

Set Up the Smoker and Start the Cook

Hold your grill-grate or chamber temperature steady between 225°F and 250°F, and place a probe thermometer at grate level so you are not guessing. Season the brisket, get it on the smoker fat-side up, and let the first several hours run without opening the lid more than necessary. For a full walkthrough of setup and seasoning, read How to Smoke Brisket in a Smoker: A Step-by-Step Guide for Juicy Results.

  1. Trim the fat cap to about a quarter inch.
  2. Apply a binder and your rub, then let the meat sit for 30 to 60 minutes.
  3. Preheat the smoker and confirm the temperature is stable.
  4. Insert a leave-in probe into the thickest part of the flat.
  5. Track the cook and check the smoker, not the brisket, when deciding to add fuel.

Wrap, Rest and Check for Doneness

Most cooks wrap the brisket once the bark is set and the color is where they want it, often somewhere around 160°F to 170°F internal, to push through the stall. Pull the brisket when the probe slides into the flat with little resistance, which usually happens between 195°F and 205°F. Don’t rely on temperature alone; the feel of the probe is the more reliable signal. A clear overview of target numbers is in Internal Temp of Brisket: Target Numbers and How to Know It's Done.

Rest the brisket wrapped for at least one hour, and longer if you can hold it in a warm cooler. Resting lets the juices redistribute and gives the connective tissue time to settle, which makes slicing much cleaner.

Common Mistakes

  • Pulling by the clock instead of by probe feel, which leads to tough or dry slices.
  • Running the smoker too hot, which can dry the meat before collagen breaks down.
  • Opening the lid constantly, which lengthens the cook and temperature swings.
  • Slicing straight off the smoker without a rest.
  • Skipping the fat trim, which can keep the bark from forming evenly.
  • Leave-in probe thermometer: Lets you watch the flat temperature without opening the lid. View on Amazon
  • Insulated cooler: Holds a wrapped brisket hot during a long rest. View on Amazon
  • Butcher paper: A breathable wrap that helps protect bark while keeping moisture in. View on Amazon

FAQ

Does brisket cook faster at higher temperatures?

Yes, running at 250°F typically shortens the cook compared with 225°F. Going much hotter can dry out the meat, so most pitmasters stay in the lower range for better results.

How long should a brisket rest after smoking?

Aim for at least one hour wrapped, and up to several hours in a cooler if your schedule allows. Longer rests generally improve tenderness and make slicing easier.

Can I speed up a brisket that is taking too long?

Raising the smoker temperature a little can shorten the remaining time, but avoid large jumps. Wrapping the brisket also helps push through the stall without drying it out.

Conclusion

Plan for about 1 to 1.5 hours per pound at 225°F to 250°F, and treat that as a starting estimate. Let the probe and the meat’s feel decide when it is done, then rest it well before slicing. With a steady smoker and patience, you will get a tender, juicy brisket every time.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our BBQ & grilling guides, checking product details against manufacturer specifications and owner feedback.