Updated November 2026
To smoke a beef brisket, plan on roughly 1 to 1.5 hours per pound at 225°F to 250°F, though the real finish point is an internal temperature of about 195°F to 205°F and a probe that slides in with almost no resistance. A 12-pound packer brisket typically takes 12 to 18 hours in total, so the cook is measured in patience as much as in clock time. This guide covers how to estimate your timeline, what to watch for along the way, and how to rest the meat so the slices stay moist.
Estimate Your Brisket Cook Time
Weight gives you a starting estimate, but it is only a rough guide. A flat or a whole packer with a thick point will finish at very different times, and a cold brisket straight from the fridge can add an hour or more. Most pitmasters plan around 1.5 hours per pound at 225°F and then adjust based on the thermometer, not the calendar.
Shopping for one? See our guide: Is Brisket Beef or Pork? Key Differences Explained (2026).
- Trimmed brisket, 10 to 12 lb: about 10 to 14 hours at 225°F
- Untrimmed packer, 14 to 16 lb: about 14 to 18 hours at 225°F
- Brisket flat, 4 to 6 lb: about 6 to 9 hours at 250°F
Expect a stall somewhere between 150°F and 170°F internal, where the temperature can sit flat for hours as moisture evaporates from the surface. Wrapping in butcher paper or foil once the bark is set usually pushes the cook through the stall faster. We also found How Long in Primary Fermenter: A Step-by-Step Guide for Homebrewers useful on this point.
Set Up the Smoker and Monitor the Cook
Hold your smoker steady between 225°F and 250°F at grate level. Use two probes: one in the thickest part of the flat and one in the point, since the point often runs 10°F to 20°F hotter. Check your wood or pellet supply before you start, because a long overnight cook can drain a hopper or firebox faster than expected.
- Trim the fat cap to about 1/4 inch and season generously with salt and pepper or your favorite rub.
- Place the brisket fat side up (or down, depending on your smoker’s heat source) and close the lid.
- Start checking internal temperature around 160°F, once the bark has formed.
- Wrap in butcher paper when the bark is dark and firm, usually around 165°F to 170°F.
- Pull the brisket when the thickest part reads 195°F to 205°F and the probe feels like warm butter.
Rest the Brisket Before Slicing
Resting is part of the cook time, not an optional extra. Wrap the brisket in towels, place it in a dry cooler, and let it rest for at least one hour, and up to four hours if you need to hold it. This lets the collagen finish breaking down and the juices redistribute, so the slices hold together and stay moist.
Recommended gear
- Dual-probe leave-in thermometer: Two probes let you track the flat and point at once, which matters most during the stall. View on Amazon
- Pink butcher paper: It lets moisture escape while protecting the bark, a common choice for wrapping brisket mid-cook. View on Amazon
- Insulated cooler for resting: A cooler keeps the brisket warm and tender for hours without overcooking the outside. View on Amazon
Common Mistakes
- Pulling the brisket based on time alone instead of probe tenderness.
- Cooking above 275°F, which dries the meat before collagen breaks down.
- Slicing immediately after the cook, which lets juices run out onto the board.
- Trusting a single probe when the point and flat cook at different rates.
- Wrapping too early, before a firm bark has formed, which softens the crust.
FAQ
How long to smoke a beef brisket at 225°F?
Expect roughly 1 to 1.5 hours per pound at 225°F, so a 12-pound brisket usually takes 12 to 18 hours. Always confirm doneness with a probe rather than the clock.
What internal temperature should a smoked brisket reach?
Most brisket is done between 195°F and 205°F internal, when a probe slides in with little resistance. Check the flat and the point, since they can finish at different times.
How long should brisket rest after smoking?
Rest it at least one hour wrapped and insulated, and up to four hours if needed. Resting lets the juices settle and keeps the slices moist.
Conclusion
Plan roughly 1 to 1.5 hours per pound at 225°F to 250°F, but let a probe reading of 195°F to 205°F decide when it is done. Rest the brisket well before slicing, and keep notes on each cook so your timing improves. With a consistent smoker and a good thermometer, your next brisket will be easier to predict.
Related reading
- How Long to Smoke a Brisket? Times by Weight and Temperature
- How to Cook Beef Brisket: A Step-by-Step Guide for Beginners
- How to BBQ Different Beef Cuts: From Brisket to Ribeye
- What Does Smoked Brisket Taste Like? Flavor, Bark and Smoke Explained
- Weber Kansas City BBQ Rub: How to Use It for Ribs, Brisket and Pork

