Updated November 2026

A camp chef pellet grill dlx is ready for real cooking once you have leveled it, burned off the factory residue, seasoned the cooking surface and learned how its controller holds temperature. This guide walks you through each of those steps in order, so your first cook goes smoothly and you understand how the grill behaves before you put a brisket or a rack of ribs on it.

Step 1: Position and Level the Grill

Place the grill on a flat, level surface with at least several inches of clearance from walls and overhangs, and keep it away from anything that could catch heat or smoke. Pellet grills rely on airflow for consistent combustion, so avoid enclosing the grill in a tight space. Check the owner’s manual for the clearance distances the manufacturer specifies, since these vary by model and by local code.

Step 2: Burn In the Grill Before Cooking

Before any food goes on, run the grill at high temperature for about 30 to 45 minutes with the lid closed. This burns off manufacturing oils and any packing residue. Expect some smoke and odor the first time; that is normal. Once the burn-in is done, let the grill cool and wipe down the interior and grates.

Step 3: Season the Cooking Surface

Wipe the grates with a light coat of high smoke-point oil, such as canola or vegetable oil, then run the grill at around 350 to 400 degrees Fahrenheit for an hour. Repeat if the grates still look dry or bare. Seasoning builds a thin protective layer that reduces sticking and helps prevent rust.

Step 4: Learn the Controller and Temperature Behavior

Pellet grills hold temperature through a controller that feeds pellets into the firepot and runs a fan. Before cooking anything expensive, run a test cook at two or three set points, such as 225, 275 and 325 degrees, and watch how quickly the grill reaches each one and how much it swings. Owners often report that ambient temperature, wind and lid openings cause the most noticeable fluctuations, so note those effects on your first few cooks.

Checklist before your first cook

  1. Grill is level and clear of obstructions.
  2. Hopper is filled with food-grade hardwood pellets.
  3. Burn-in is complete and the grill has cooled.
  4. Grates are seasoned and wiped clean.
  5. Meat probe or a separate leave-in thermometer is ready.
  6. Drip tray and grease bucket are empty and in place.

Step 5: Run Your First Cook

Start with something forgiving, such as chicken thighs or pork shoulder, at 225 to 250 degrees. Keep the lid closed as much as possible, and check internal temperature with a probe rather than relying on the built-in thermometer alone. Pellet grills produce a mild, consistent smoke, so you may want to use a stronger wood flavor, such as hickory, or a fruit wood, such as cherry, to find the profile you like.

Food Typical set point Target internal temp
Chicken thighs 275 F 175 to 185 F
Pork shoulder 225 F 195 to 205 F
Baby back ribs 250 F 195 to 203 F

Common mistakes

  • Skipping burn-in, which leaves oily residue that tastes harsh on early cooks.
  • Opening the lid repeatedly, which causes large temperature swings and longer cook times.
  • Trusting the built-in thermometer for doneness instead of a probe.
  • Letting the hopper run low mid-cook, which can interrupt the fire.
  • Using non-food-grade pellets or heavily flavored blends with oils and additives.
  • A dual-probe digital meat thermometer lets you track food and grill temperature at the same time. View on Amazon
  • Food-grade hardwood pellets in a few flavors help you test smoke profiles without buying a full bag of one type. View on Amazon
  • A grill cover made for pellet grills protects the controller and hopper from moisture between cooks. View on Amazon

If you are still comparing models, this overview of Camp Chef Pellet Grill Guide: Setup, Seasoning and First Cooks covers similar setup steps, and the roundup of 7 Best Camp Chef Pro DLX Pellet Grill Options for 2026: Compared helps you weigh the DLX against other configurations. For a broader look at fuel choices, see Wood Pellet Grill vs Gas Grill (2026): Which Is Better for Your Backyard?.

FAQ

How long should I preheat a camp chef pellet grill dlx?

Most owners preheat for 10 to 15 minutes at the target temperature before adding food. Confirm the actual grate temperature with an independent thermometer, since built-in gauges can read differently.

Do I need to season the grates on a new grill?

Yes, a light oil coat and a one-hour run at moderate heat helps reduce sticking and protects the surface. Repeat seasoning if you notice dry or bare spots over time.

What pellets should I use?

Use 100 percent food-grade hardwood pellets from a reputable brand. Avoid pellets with added oils or fillers, which can affect flavor and cause buildup.

Conclusion

Level the grill, burn it in, season the grates and learn how the controller responds before serving guests. Once you understand how your camp chef pellet grill dlx behaves, adjusting set points and timing for different cuts becomes much easier. Check the owner’s manual for model-specific details and follow it on clearances, cleaning and warranty requirements.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our BBQ & grilling guides, checking product details against manufacturer specifications and owner feedback.