Updated November 2026

Smoked ham in a smoker is one of the easiest large cuts you can cook, and the payoff is a moist, smoky centerpiece with a lacquered glaze. This guide covers how to pick the right ham, set your smoker for steady heat, and pull it at the correct internal temperature. Most pre-cooked hams only need to be reheated, so your job is really about adding smoke flavor and keeping the meat from drying out.

Choose the Right Ham and Prep It

Start by checking the label. A fully cooked, bone-in or boneless ham needs to reach 140°F internal, while an uncooked fresh ham needs 145°F minimum. Pre-cooked hams are the forgiving choice for beginners. Bone-in hams usually have more flavor and stay moister, but they take longer and can be harder to carve.

Shopping for one? See our guide: 4 Best Smoked Turkey Legs for Smoking Turkey Legs in a Smoker (2026).

Score the fat cap in a diamond pattern about a quarter inch deep, then pat the surface dry. If the ham is very salty, soak it in cool water for a few hours and change the water once. Skip this step for most modern hams, since over-soaking pulls out flavor.

Set Up Your Smoker for Low, Steady Heat

Aim for a smoker temperature between 225°F and 250°F. Lower heat gives you more smoke flavor and gentler cooking, which protects the moisture in the meat. Use a mild wood such as apple, cherry or pecan. Hickory works too, but use it sparingly, because heavy smoke can turn the flavor harsh over a long cook.

Let the smoker stabilize for 15 to 20 minutes before the ham goes on. Place the ham fat side up on the grate, away from the firebox or the heating element, so the heat stays even. If you are new to the appliance, this walkthrough on How to Set Up Your Smoker for the First Cook covers the basics of getting temperatures steady.

Smoke the Ham to the Right Internal Temperature

Plan on roughly 30 to 40 minutes per pound at 225°F to 250°F for a fully cooked ham, though weight, shape and how often you open the lid all change timing. Use a leave-in probe thermometer in the thickest part of the meat, without touching the bone. Pull a fully cooked ham at 140°F. For a fresh ham, go to 145°F and let it rest.

Smoke the ham unwrapped for the first two hours to build a deep color and absorb smoke. After that, you can glaze it. Brush on a mix of brown sugar, mustard, apple cider and a little honey every 20 to 30 minutes for the last hour. Sugary glazes burn quickly, so keep the heat moderate and avoid thick layers early on.

Rest, Carve and Serve

Pull the ham and tent it loosely with foil for 20 to 30 minutes. Resting lets the juices settle, which makes slicing cleaner and keeps the meat moist. Carve against the grain for tender slices, or cut thin wedges around the bone if you are working with a bone-in ham.

Quick checklist

  1. Confirm whether the ham is fully cooked or fresh.
  2. Score the fat cap and pat the surface dry.
  3. Preheat the smoker to 225°F to 250°F and stabilize for 15 minutes.
  4. Use a mild fruit wood and smoke unwrapped for about two hours.
  5. Glaze during the final hour, watching for burning.
  6. Probe to 140°F (cooked) or 145°F (fresh), then rest 20 to 30 minutes.

Common Mistakes to Avoid

  • Cooking at high heat, which dries out the meat before the center warms.
  • Glazing too early, causing the sugars to scorch and turn bitter.
  • Relying on time alone instead of a probe thermometer.
  • Using too much strong wood, such as mesquite, which can overpower the ham.
  • Carving immediately, which lets the juices run out onto the board.

A leave-in probe thermometer is the most useful tool here, since it lets you track internal temperature without opening the smoker. Look for a dual-probe model so you can monitor the ham and the cooking chamber together. View on Amazon

A sturdy roasting pan or a disposable aluminum pan helps catch drippings and makes it easier to move the ham on and off the grate. View on Amazon

A long-handled basting brush is handy for applying glaze without reaching into hot smoke. View on Amazon

FAQ

Do I need to cook a pre-cooked ham in the smoker?

No, it is already cooked, so you are reheating it and adding smoke flavor. Bring it to 140°F internal and keep the smoker temperature low so the outside does not dry out.

What wood is best for smoked ham?

Apple and cherry are the most common choices because they add mild sweetness that pairs well with pork. Pecan is another good option, while hickory works if you want a stronger flavor.

Why is my smoked ham dry?

Dryness usually comes from cooking at too high a temperature or pulling the ham too late. Use a probe thermometer, pull at the right internal temperature, and rest the meat before carving.

Conclusion

Smoked ham in a smoker comes down to choosing the right cut, keeping heat low and steady, and pulling at the correct internal temperature. Add a simple glaze in the final hour and let the meat rest before slicing. For additional smoker techniques, see How to Prevent Rust on Your BBQ Grill or Smoker to keep your equipment in good shape between cooks.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our BBQ & grilling guides, checking product details against manufacturer specifications and owner feedback.