Updated November 2026
A good pork loin BBQ rub recipe does two jobs: it builds a sweet, savory crust and it seasons the meat evenly from edge to edge. This guide gives you a balanced base rub with exact measurements, shows you how to apply it so it sticks, and explains how to match the seasoning to your cooking method. By the end, you will know how to mix, apply, and rest a pork loin so the bark is set and the slices stay moist.
Why Pork Loin Needs a Different Approach
Pork loin is lean. Unlike a pork shoulder, which carries plenty of intramuscular fat and collagen, a loin has very little of either. That makes it easy to overcook and quick to dry out. Because it lacks the fat cushion that protects a shoulder, the rub has to do more work, and the cook has to be more precise about temperature.
Two things follow from this. First, the rub should lean toward sugar and salt, which help the surface brown and hold moisture. Second, you should aim for a shorter, hotter cook than you would use for a shoulder. Most pitmasters pull a loin in the 140 to 145 degrees F range, then rest it, which lets the carryover heat bring it to a safe and juicy finish.
The Base Pork Loin BBQ Rub Recipe
This rub works on a bone-in or boneless pork loin roast of roughly 3 to 4 pounds. It is built around a 2-to-1 ratio of sugar to salt, with smoked paprika and garlic for depth. Adjust the heat to taste.
Ingredients
- 2 tablespoons brown sugar, packed
- 1 tablespoon kosher salt
- 1 tablespoon smoked paprika
- 2 teaspoons garlic powder
- 2 teaspoons onion powder
- 1 teaspoon ground black pepper, coarse
- 1 teaspoon chili powder
- 1/2 teaspoon ground cumin
- 1/2 teaspoon dried thyme
- 1/4 teaspoon cayenne (optional)
Mixing Method
- Combine all dry ingredients in a small bowl.
- Break up any clumps in the brown sugar with your fingers or a fork.
- Mix until the color is even, with no streaks of paprika or chili powder.
- Store leftover rub in an airtight container away from heat and light. It keeps well for several months, though the paprika will fade over time.
Preparing the Pork Loin
Good seasoning starts with a properly prepped surface. Rinse the loin under cold water and pat it completely dry with paper towels. Moisture on the surface blocks the rub from adhering and steams the meat instead of letting it form bark.
Prep Steps
- Trim any silver skin, loose fat, or hard membrane from the surface.
- Pat dry on all sides.
- Apply a thin binder. Yellow mustard is the traditional choice, and the flavor cooks off. A light coat of olive oil also works.
- Let the loin sit at room temperature for 20 to 30 minutes while your smoker or grill comes up to temperature.
Applying the Rub Evenly
Sprinkle about 2 tablespoons of the rub per pound of meat, adjusting for your taste. Coat all sides, including the ends. Press the rub into the surface with your palm rather than just dusting it on. Wrap the loin in plastic and refrigerate it for at least 1 hour, and up to 12 hours, so the salt can penetrate.
If you are using a boneless loin, tie it with butcher’s twine at 1-inch intervals. This keeps the roast an even thickness so it cooks uniformly.
Cooking Methods and Temperature Targets
The rub works across several cooking methods. Choose the one that fits your equipment, then set your target temperatures.
| Method | Cooker Temp | Target Internal Temp | Approximate Time |
|---|---|---|---|
| Smoker (indirect) | 250 to 275 F | 140 to 145 F | 1.5 to 2.5 hours |
| Charcoal grill (indirect) | 300 to 350 F | 140 to 145 F | 1 to 1.5 hours |
| Gas grill (indirect) | 325 to 350 F | 140 to 145 F | 1 to 1.5 hours |
| Oven | 350 F | 140 to 145 F | 1 to 1.5 hours |
Times vary with loin size and thickness. Use a leave-in or probe thermometer rather than relying on the clock. Check the loin in the thickest part, avoiding bone.
Smoker Method
Set the smoker to around 250 to 275 degrees F with a mild wood such as apple, cherry, or hickory. Place the loin fat side up if it has a fat cap. Smoke until the internal temperature reaches 140 degrees F, then pull it. Wrapping is optional. Many cooks skip it to keep the bark intact.
Grill Method
Set up a two-zone fire on a charcoal grill or a two-burner setup on a gas grill. Place the loin over indirect heat, close the lid, and cook to temperature. Add a few chunks of wood for smoke if you like. Keep the lid closed as much as possible to hold the heat steady.
Resting and Slicing
Rest the loin for at least 10 to 15 minutes, loosely tented with foil. During the rest, juices redistribute and the internal temperature rises a few degrees. Cutting too early lets those juices run onto the cutting board.
Slice across the grain into 1/2-inch medallions. Serve immediately, or hold the sliced meat in a warm pan with a splash of juice or broth.
Tips for Better Results
- Apply the rub to a dry surface. Moisture is the enemy of bark.
- Salt early for better penetration. Give the loin at least an hour in the fridge.
- Use coarse black pepper and kosher salt. Fine table salt is much saltier by volume.
- Cook over indirect heat. Direct flame burns sugar before the interior is done.
- Pull at 140 to 145 degrees F. Pork loin is safe at that range with a rest, and going higher dries the meat.
- Keep a log of your cook times and temperatures so you can dial in your specific cooker.
Common Mistakes
- Using too much sugar. A rub heavy in brown sugar can scorch on a hot grill. Keep the sugar at about 2 tablespoons per pound of total rub, or reduce it if you cook above 300 degrees F.
- Skipping the rest. Slicing right off the heat leaves dry meat on the board.
- Cooking to time alone. Loin thickness varies, and so do cookers. Temperature is the only reliable guide.
- Applying wet rub. Rub applied over a wet surface clumps and falls off.
- Overcooking. A pork loin pulled at 160 degrees F will be noticeably tougher than one pulled at 140 to 145 degrees F.
Recommended gear
A reliable thermometer is the single most useful tool for this cook. It removes the guesswork that causes most loin problems.
- Instant-read thermometer: Lets you check the thickest part of the loin quickly without opening the cooker for long. View on Amazon
- Leave-in probe thermometer: Tracks internal temperature throughout the cook so you can pull at the right moment. View on Amazon
- Butcher’s twine: Keeps a boneless loin an even thickness for consistent cooking. View on Amazon
Related Reading
If you want to compare seasoning styles, start with the Ultimate BBQ Pork Rub Recipe: Step-by-Step for Ribs and Shoulder, which covers a more robust blend for longer cooks. For a sweeter profile, the Rib Rub Recipe for BBQ: A Step-by-Step Guide to Sweet, Smoky Ribs shows how sugar balance changes the bark. If you prefer a ready-made option, 5 Best BBQ Dry Rubs for Pork Loin Picks Compared (2026) compares store-bought blends. For the cooking side, the Pork Loin on Smoker Recipe: A Step-by-Step Guide for Juicy Results walks through smoker timing in more depth.
FAQ
Can I use this rub on a pork tenderloin?
Yes. Tenderloins are smaller and cook faster, usually in 20 to 30 minutes on a grill at 350 degrees F, pulled at 140 to 145 degrees F. Reduce the rub amount to match the smaller surface area.
How far ahead should I apply the rub?
At least an hour is helpful, and up to 12 hours in the refrigerator works well. Longer than that can make the surface too salty, so do not go beyond about 24 hours.
Should I wrap the pork loin during cooking?
Wrapping is optional. It speeds the cook and keeps moisture in, but it softens the bark. If you want a firmer crust, leave the loin unwrapped.
Why is my rub burning?
Sugar burns at high heat. Lower the cooker temperature, move the loin to indirect heat, or reduce the amount of brown sugar in the blend.
Can I make the rub without brown sugar?
Yes. Replace the brown sugar with white sugar, or use a smaller amount of honey or maple sugar. Sugar-free versions will brown less, so expect a paler crust.
What wood pairs best with pork loin?
Fruit woods such as apple and cherry are mild and pair well with pork. Hickory gives a stronger, more classic smoke flavor. Use a light hand, since pork loin absorbs smoke quickly.
How do I know when the loin is done?
Use a probe thermometer and check the thickest part. A pull temperature of 140 to 145 degrees F, followed by a 10 to 15 minute rest, gives a juicy, safe result. Confirm your food safety requirements with local guidelines or your food safety authority if you are cooking for a group with specific needs.
Conclusion
A balanced pork loin BBQ rub recipe, built on brown sugar, salt, and smoked paprika, gives you a flavorful crust without overpowering the lean meat. Dry the surface, season early, and cook over indirect heat to a pull temperature of 140 to 145 degrees F. Rest the loin before slicing and you will get a juicy result that holds up on the plate.

