Updated November 2026
Pork butt smoker recipes come down to three things: a simple rub, steady low heat around 225°F to 250°F, and patience through the stall. Follow the steps below and you will end up with a bone-in shoulder that pulls apart with almost no effort and stays moist from the first slice to the last.
Prep the Pork Butt for the Smoker
Start with a bone-in pork butt in the 7 to 9 pound range, which usually feeds a crowd and gives you enough fat to keep the meat moist. Trim any loose hard fat and silver skin, but leave the fat cap on the top to render slowly over the cook. Apply a thin layer of yellow mustard or olive oil as a binder, then coat the entire surface with your rub. A basic mix of brown sugar, paprika, kosher salt, black pepper, garlic powder and a little cayenne works well, and you can find more options in our Ultimate BBQ Pork Rub Recipe: Step-by-Step for Ribs and Shoulder guide. Let the seasoned meat rest in the fridge for at least 4 hours, or overnight if you have the time.
Shopping for one? See our guide: 7 Best Pork Butt Pellet Smoker Picks for Backyard Cooks (2026).
Set Up the Smoker and Control Temperature
Preheat your smoker to a steady 225°F to 250°F before the meat goes on. Use hardwood such as oak, hickory or apple, or a fruitwood for a milder smoke. If you are running a pellet grill, set the controller and let it stabilize for 15 minutes. Place a leave-in probe thermometer in the thickest part of the shoulder, away from the bone, and a second probe in the grill chamber so you can track both numbers. For more on pellet setups, see Pellet Grill Pork Butt: A Step-by-Step Guide to Juicy Pulled Pork.
Cook Through the Stall and Wrap
Expect the internal temperature to climb steadily to around 150°F to 160°F, then stall for hours as moisture evaporates and cools the surface. Do not panic and do not crank the heat. When the bark is dark mahogany and the stall persists, wrap the butt tightly in butcher paper or foil, adding a splash of apple juice or vinegar if you like. Return it to the smoker until the internal temperature reaches roughly 198°F to 205°F, where a probe slides into the meat with little resistance. Total cook time often lands between 10 and 14 hours, depending on the size of the shoulder and your smoker’s consistency.
Rest and Pull the Meat
Pull the butt off the smoker once it hits temperature and let it rest, still wrapped, for at least 1 hour in a dry cooler or on a counter covered with towels. Resting lets the juices redistribute and the connective tissue finish softening. When you are ready, the bone should lift out cleanly, and the meat should shred with forks or your hands. Mix the bark and the juices back into the pulled pork for the best texture.
Pork Butt Smoking Checklist
- Bone-in pork butt, 7 to 9 pounds
- Yellow mustard or olive oil for binder
- Pork rub with sugar, salt, pepper and paprika
- Hardwood chunks or pellets (oak, hickory, apple)
- Two leave-in probe thermometers
- Butcher paper or heavy-duty foil
- Cooler or towels for resting
Recommended gear
- Leave-in probe thermometer: Lets you monitor the meat and the chamber without opening the lid, which keeps temperature swings down during the stall. View on Amazon
- Butcher paper: Wraps the shoulder while letting some smoke and moisture through, so the bark stays firm. View on Amazon
- Insulated cooler: Holds the wrapped pork at safe serving heat during the rest period. View on Amazon
Common Mistakes and Tips
- Cooking too hot. Temperatures above 275°F dry out the meat before collagen can break down.
- Pulling at a set time instead of temperature. Go by probe feel, not the clock.
- Skipping the rest. Pulling straight off the smoker leads to dry, stringy pork.
- Opening the lid constantly. Each opening can add 10 to 15 minutes to the cook.
- Trimming off all the fat. The fat cap protects the meat and adds flavor.
FAQ
How long does a pork butt take in a smoker?
Most bone-in shoulders take 1.5 to 2 hours per pound at 225°F to 250°F, so a 8-pound butt often needs 10 to 14 hours. Cook to temperature rather than time.
What internal temperature is pork butt done?
Pork butt is ready to pull at about 198°F to 205°F, when a probe goes in with little resistance. Food safety guidelines call for at least 145°F, but pulled pork needs the higher range for texture.
Should I wrap pork butt in foil or butcher paper?
Foil gives a softer bark and faster cook, while butcher paper keeps more bark texture and lets some smoke through. Either works well, so choose based on the texture you prefer.
Conclusion
With a simple rub, a steady 225°F to 250°F smoker, and patience through the stall, pork butt smoker recipes produce tender, juicy pulled pork every time. Track the internal temperature, rest the meat properly, and you will get consistent results. Adjust the rub and wood to suit your taste once you have the process down.

