Updated November 2026

To barbecue burgers on gas grill, you set up two heat zones, form patties with a little space in the center, cook them over medium-high heat, and flip only once. Done right, you get a browned crust, a juicy middle and no flare-ups. The steps below cover the setup, the cook and how to check doneness.

Prep the Grill and the Patties

Start by preheating. Turn every burner to high, close the lid and let the grates heat for 10 to 15 minutes. Then scrape the grates clean with a stiff brush. Set one burner to medium-high and leave the other off or on low, so you have a hot zone and a cooler zone to move patties between. For another angle, check out 5 Best Burgers on Gas Grill Griddles and Grills for Backyard Cooks (2026).

Shopping for one? See our guide: Top 6 Propane Gas Barbecue Grill Picks for Backyard Cooks in 2026.

For the meat, use 80/20 ground beef, which gives enough fat to keep the burger moist. Shape the patties about 3/4 inch thick and slightly wider than your bun, because they shrink as the fat renders. Press a shallow dimple into the center of each one. It keeps the middle from puffing up. Season both sides generously with salt and pepper just before they hit the grill.

Cook the Burgers Over Direct and Indirect Heat

Oil the grates lightly with a paper towel and tongs, then place the patties over the hot zone. Close the lid and leave them alone for 3 to 4 minutes. You want a deep brown crust before you touch them. When the edges look cooked and the juices start to pool on top, flip once.

After the flip, check the internal temperature. For medium, pull the burgers at 130 to 135°F and let carryover heat bring them to about 140°F. For well done, the USDA recommends 160°F. If the crust is browning faster than the center is cooking, move the patties to the cooler zone and close the lid for another 2 to 4 minutes.

Add cheese in the last minute. Close the lid so it melts. Toast the buns cut side down over the cooler zone for 30 to 60 seconds, watching closely so they don’t burn.

Rest, Assemble and Serve

Move the burgers to a clean plate and let them rest for about 3 minutes. This lets the juices settle back into the meat instead of running onto the bun. Then assemble and serve while they’re hot.

Checklist

  1. Preheat all burners on high for 10 to 15 minutes.
  2. Clean the grates with a stiff brush.
  3. Set up one hot zone and one cooler zone.
  4. Form 3/4-inch patties with a dimple in the center.
  5. Season both sides just before grilling.
  6. Cook over direct heat for 3 to 4 minutes, flip once.
  7. Check temperature: 130 to 135°F for medium, then rest.

Common Mistakes

  • Pressing the patties with a spatula. This squeezes out juices and dries the burger.
  • Flipping too early. The crust won’t form and the patty may stick.
  • Skipping the cooler zone, which leads to burnt outsides and raw centers.
  • Salting the meat hours ahead, which can change the texture of the ground beef.
  • Letting fat drip onto the flames without a drip pan, causing flare-ups.

A long-handled grill spatula with a thin, flexible edge makes it easy to lift patties without tearing them apart. View on Amazon

An instant-read digital thermometer lets you check doneness quickly so you don’t have to cut into the burger to guess. View on Amazon

A stiff grill brush with stainless bristles helps clear residue from the grates before you start cooking. View on Amazon

FAQ

Should I close the lid when grilling burgers on a gas grill?

Yes, closing the lid helps the burgers cook through evenly and gives a more consistent sear. Open it only to flip or check temperature. Keep an eye on flare-ups while the lid is open.

How long do gas grill burgers take to cook?

A 3/4-inch patty usually takes about 8 to 10 minutes total over medium-high heat, with one flip. Thicker patties need more time, so rely on an internal thermometer rather than the clock.

Can I grill frozen burger patties on a gas grill?

You can, but cook them over medium heat for longer and flip more often to avoid burning the outside. Confirm the center reaches 160°F before serving, as the USDA recommends for ground beef.

Conclusion

Learning how to barbecue burgers on gas grill comes down to two-zone heat, minimal handling and an accurate thermometer. Get those right and your burgers will come off the grill juicy and evenly cooked. Practice a few cooks and you’ll quickly know exactly when to flip and pull.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our BBQ & grilling guides, checking product details against manufacturer specifications and owner feedback.