Updated November 2026
This chicken in smoker recipe walks you through a simple brine, a steady smoker temperature and the internal temperature targets that give you juicy meat with crisp, golden skin. You will end up with a whole bird or pieces that taste smoky without drying out. The method works on most pellet, offset and electric smokers.
Prep the Chicken and Brine
Start with a whole bird of about 3 to 4 pounds, or bone-in pieces. Remove the giblets, pat the skin dry and let the chicken rest uncovered in the fridge for an hour if you have time. A basic brine of 1 cup kosher salt and 1/2 cup sugar per gallon of cold water, soaked for 2 to 4 hours, adds moisture that holds up well over smoke. Rinse the bird, pat it completely dry and rub it lightly with oil and your favorite poultry rub.
Shopping for one? See our guide: 5 Best BBQ Chicken Rub Smoker Picks for Juicy Results 2026.
Set Up the Smoker and Control Temperature
Preheat your smoker to 275 to 300 degrees F. Use a mild wood like apple, cherry or pecan. Heavy woods such as mesquite can turn poultry bitter. Keep the smoke thin and blue rather than thick and white, because heavy smoke leaves a harsh taste. Place a probe thermometer in the thickest part of the breast or thigh, away from bone, so you can track progress without opening the lid often.
Smoke to Temperature and Finish the Skin
Smoke the chicken until the breast reaches 160 degrees F and the thigh reaches 175 to 180 degrees F. A whole bird usually takes 2.5 to 4 hours at 275 degrees F, while split breasts take about 1.5 to 2 hours. For crisper skin, raise the smoker to 350 degrees F for the last 15 to 20 minutes. Pull the chicken and let it rest 10 minutes before carving so the juices settle.
Checklist: What You Need
- Whole chicken or bone-in pieces, 3 to 4 pounds
- Kosher salt, sugar and water for the brine
- Poultry rub and neutral oil
- Mild wood chunks or pellets
- Reliable probe thermometer
- Foil pan or drip tray
Common Mistakes to Avoid
- Pulling the bird by breast temperature alone. Thighs need more heat to become tender.
- Skipping the dry-out step. Wet skin steams instead of crisping.
- Running the smoker too hot. Temperatures above 325 degrees F can dry out breast meat.
- Using heavy wood. Stick with fruitwoods or hickory in small amounts.
- Cutting in too soon. Resting keeps the meat juicy on the plate.
Recommended Gear
A dual-probe digital thermometer lets you track breast and thigh temperatures at the same time, which removes much of the guesswork. View on Amazon
A small chunk or pellet wood sampler helps you test mild woods before committing to a full cook. View on Amazon
FAQ
What temperature should chicken be cooked to in a smoker?
Cook chicken breast to 160 degrees F and thighs to 175 to 180 degrees F, measured in the thickest part away from bone. Food safety guidelines call for at least 165 degrees F, so many cooks pull at that point for a safe margin.
Should I brine chicken before smoking it?
Brining is optional but helpful. A salt and sugar brine for 2 to 4 hours helps the meat hold moisture during a long, low smoke. Avoid brining longer than 6 hours, as the texture can become spongy.
How long does it take to smoke a whole chicken?
At 275 to 300 degrees F, a 3 to 4 pound whole chicken usually takes 2.5 to 4 hours. Rely on the internal temperature rather than the clock, since smoker output varies.
Conclusion
With a simple brine, a steady 275 to 300 degree F smoker and a probe in the thickest part of the meat, this chicken in smoker recipe gives reliable results. Pull at the right temperatures, finish the skin hot and let the bird rest before carving. For more detail, see How to Smoke Chicken in Smoker: A Step-by-Step Guide for Juicy Results and Whole Chicken in the Smoker: A Step-by-Step Guide to Juicy Results.

