Updated November 2026
A blackstone 22 XL griddle pellet grill combo puts two cooking styles on one frame: a pellet-fed smoker side for low-and-slow work and a flat-top griddle for searing, smash burgers and breakfast. This guide walks you through setup, seasoning the griddle, running your first cook and keeping both sides performing well. Check the manufacturer’s manual for exact clearances, wattage and warranty terms before you start.
Set Up the Combo Before the First Fire
Place the unit on a level, non-combustible surface with clear space on all sides and overhead. Manufacturers generally specify minimum clearances from walls, overhangs and vinyl siding, so measure rather than guess. Keep the grill out of wind and away from rain exposure if it is not covered by a rated cover.
Shopping for one? See our guide: Propane Grill and Pellet Smoker Combo (2026): Which Is Better for Your Backyard?.
Assemble the legs, side shelves and grease management parts exactly as the manual shows. Confirm the grease cup or tray sits under the drain path before you light anything. Plug the unit into a grounded outlet with a dedicated circuit, and avoid extension cords when possible.
Season the Griddle Top
Most flat-top griddles ship with a protective coating that needs to be removed. Wash the surface with warm water and a little dish soap, rinse, and dry it completely. Then heat the griddle to around 350 to 400°F, apply a thin coat of high smoke-point oil such as canola or refined avocado oil, and let it heat until it just starts to smoke. Wipe off the excess with a paper towel, and repeat three to four times until the surface looks dark and slick.
Run Your First Cook on Both Zones
Start with a simple test: preheat the pellet side to 225°F and the griddle to medium-high. Use a probe thermometer on the grate and a separate surface thermometer on the griddle, because built-in dials often read differently from actual surface temperature. Once both sides are stable, cook a batch of smash burgers on the griddle while a few sausages or chicken thighs finish on the grate. This shows you how the zones behave and how much heat transfers across the unit.
Pellet Side Basics
Use dry, food-grade hardwood pellets and keep the hopper covered between sessions. Let the grill run on smoke for the first 10 to 15 minutes before adding food, then adjust the target temperature in small steps. Pellet grills take time to reach and hold temperature, so plan ahead for long cooks.
Griddle Side Basics
Preheat the griddle longer than you think you need, especially for searing. Use a bench scraper to move food and to clean between batches. Keep a squeeze bottle of oil nearby and re-season the surface after heavy use if you notice sticking.
Checklist for Your First Session
- Confirm clearances and a level, stable base.
- Wash, dry and season the griddle top three to four times.
- Fill the hopper with dry food-grade pellets.
- Check the grease tray and drain path.
- Have a probe thermometer, a surface thermometer, a bench scraper and heat-resistant gloves on hand.
Common Mistakes to Avoid
- Cooking on an unseasoned griddle, which leads to sticking and uneven browning.
- Trusting built-in dial readings without verifying with a separate thermometer.
- Letting grease build up in the drain path, which creates a fire risk.
- Storing pellets in a damp spot, which causes poor smoke and feed problems.
- Overcrowding the griddle, which drops surface temperature and steams food.
Recommended Gear
A dual-probe digital thermometer lets you monitor meat on the grate while tracking griddle surface heat. View on Amazon
A long-handled stainless steel bench scraper makes cleaning the griddle between batches faster and safer. View on Amazon
A weather-rated grill cover protects the pellet hopper and griddle top from moisture when the unit sits outdoors. View on Amazon
FAQ
Can I cook on both sides at the same time?
Yes, and many cooks do. Keep the pellet side for smoking or roasting and the griddle for searing, but expect heat from one side to affect the other, so check both temperatures often.
How often should I re-season the griddle?
Re-season after washing or whenever food starts sticking. Frequent use usually keeps the surface in good shape without a full reseasoning session.
Do I need special pellets for the griddle side?
No, the griddle uses the same burner system and does not burn pellets directly. Use food-grade hardwood pellets for the smoker side and follow the manufacturer’s guidance for pellet selection.
Conclusion
With a proper setup, a thorough seasoning and a test cook that checks both zones, a blackstone 22 XL griddle pellet grill combo can handle smoked meats and griddle favorites in one session. Learn how each side responds, keep your temperatures verified and clean as you go. Consult the official manual for safety guidance and warranty details.
Related reading
- 6 Best Weber Searwood XL 600 Pellet Grill Alternatives and Accessories (2026)
- 5 Best Gas Grills with Griddle Combo Picks for Backyard Cooking (2026)
- Yoder YS640S Pellet Grill: A Step-by-Step Setup and First Cook Guide
- Wood Pellet Grill vs Gas Grill (2026): Which Is Better for Your Backyard?
- Wood Pellet Grill vs Charcoal (2026): Which Is Better for Your Backyard?
- Wood Pellet Grill Turkey: Juicy, Crispy-Skin Results in 6 Steps

