Updated November 2026
The weber portable gas grill q1200 is a compact, propane-fueled grill built for tailgates, balconies and camping trips. This guide walks you through unboxing, connecting a propane cylinder, lighting the burner safely, and keeping the grill in good working order. Follow the steps in order and you should have a reliable grill ready for your first cook.
Unpack and Check the Grill Before First Use
Start by confirming that every part is present before you assemble anything. Owners often report that the cooking grates, burner tube, control knob and grease tray are the pieces most easily overlooked in the box. Check the manufacturer’s manual for the exact parts list and assembly order, since sequence can vary by production run.
- Cooking grates and warming rack
- Burner tube and igniter assembly
- Control knob and regulator hose
- Grease tray and cup
- Manual and warranty card
Connect the Propane Cylinder Safely
Connect the regulator to the cylinder only outdoors, in a well-ventilated area away from open flames and sparks. Tighten the connection by hand first, then check it for leaks before lighting.
- Make sure all control knobs are in the OFF position.
- Attach the regulator to the propane cylinder valve and tighten firmly.
- Open the cylinder valve slowly.
- Brush a soapy water solution (equal parts dish soap and water) over the hose connections. Bubbles mean a leak. Close the cylinder valve, tighten the fitting, and test again.
If the leak persists after tightening, stop and replace the regulator or hose rather than trying to use the grill. Consult a qualified propane technician if you are unsure about any connection.
Light the Burner and Preheat the Grill
Lid open, knob pressed and turned to LOW, then press the igniter. Once the burner catches, wait about 10 minutes with the lid closed before cooking. Preheating burns off manufacturing residue and brings the grates to a stable temperature.
Lighting Steps
- Open the lid before lighting, so gas cannot build up inside.
- Turn the knob to LOW and press the igniter. If it does not catch within about 5 seconds, turn the knob OFF, wait a minute, and try again.
- Close the lid and preheat on MEDIUM to HIGH for about 10 minutes.
Cook, Control Heat and Clean Up
Use the lid to control temperature. For direct cooking on steaks, burgers or chicken thighs, keep the lid closed and use medium heat. For thicker cuts, sear over high heat, then move the food to a cooler area of the grates to finish.
After cooking, turn the burner off and close the cylinder valve first, then the control knobs. Brush the grates while they are still warm, empty the grease tray regularly, and wipe the exterior with a damp cloth once the grill has cooled.
Common Mistakes to Avoid
- Lighting with the lid closed, which can cause a flare-up when the lid is opened.
- Skipping the leak test after reconnecting a cylinder.
- Letting the grease tray fill up, which raises the fire risk.
- Storing a propane cylinder inside a vehicle or enclosed space.
- Ignoring a weak flame, which often points to a clogged burner port that needs cleaning.
Recommended Gear
A few accessories make the weber portable gas grill q1200 easier to run on the go. Choose items that fit the portable use case rather than full-size grill setups.
- Grill brush with stainless bristles: makes quick work of grate cleaning while the grates are warm. View on Amazon
- Propane leak detector solution: a ready-made spray that shows leaks as bubbles, handy for routine checks. View on Amazon
- Heat-resistant grill gloves: protect your hands when adjusting grates or handling the lid. View on Amazon
FAQ
Can I use the weber portable gas grill q1200 indoors?
No. Propane grills produce carbon monoxide and should only be used outdoors, away from windows, doors and vents. Keep it at a safe distance from structures.
How long should I preheat before cooking?
About 10 minutes with the lid closed on medium to high heat is typical. Adjust based on the outdoor temperature and the food you are cooking.
Why won’t my grill light?
Check that the cylinder valve is open, the regulator is firmly connected, and the burner ports are clear of debris. If it still will not light, check the igniter and consult the manufacturer’s support resources.
Conclusion
With the connections tested, the burner lit safely and the grill preheated, the weber portable gas grill q1200 is ready for reliable cooking. Keep up with leak checks, grate cleaning and grease tray emptying, and the grill will perform well trip after trip. For more on portable models, see 7 Best Weber Traveler Portable Gas Grill Models for Travel and Camping (2026).

